Metalworks - Eyelets & Rivets

Metalworks Main | Embellishments | Eyelets & Rivets |
| Brads | Tools | Copper | Tin |

Punches and Setters can be found on the Tools page! click here to get more information about the best little eyelet setter!

The Teenie-Tiny ones 1/16", approx 100/package

1/16" eyelets, 100/package $3.00USD/100 dimensions are approximate and may vary depending on supplier availability Please choose a colour Copper Silver Brass   To learn about working with tiny eyelets and information about dimensions, click the Insight Button!

1/16" LONG Silver eyelets, 100/package $3.00USD/100 dimensions are approximate and may vary depending on supplier availability

1/8" Regular Length Eyelets available in nickel, brass and black. dimensions are approximate and may vary depending on supplier availability $3.25 USD/package of approximately 100 eyelets Please choose your metal brass silver coloured black

1/8" Long Neck Eyelets These go through most bookboard and make a nice rolled flange on the back using the Quietfire Eyelet Setter. Don't buy these if you're just using a few sheets of paper - there is no where for the extra metal to go and it makes a mess!! Brass 100/package Nickel 100/package Copper note: 50/package dimensions are approximate and may vary depending on supplier availability $3.50 USD/package Please choose a metal brass nickel copper 50/pk

1/8" Eyelet Washers Adds an very cool accent to your eyeleting. I love using a different coloured washer and eyelet. You can use these on one side of the eyelet or both sides. They can be useful if you are working with fabric and your hole is a little large. Position the washers before you set the eyelet and set as usual. $3.85 USD/package of 100 Please choose your metal brass nickel copper

Rivets and Setters   Double Headed Rivets, package of 100 - these puppies are so easy to set! Use the rivet setting tool to hammer the two sides together. Each cap is 1/4"diameter and looks the same on both sides when set. When I gently assemble the two parts, the distance in between the heads is just over 1/8" You will need a Rivet Setter and Anvil shown below in order to set these. $5.50 per pack of 100 Please choose a colour Brass Silver Click on the Insight Twill to read about setting Rivets

Rivet Setter, each has a cupped end so the rivet won't get flatted on top!! $3.50 USD   Click here to order (they're on the Tools Page)

Rivet Anvil, each The dish shape of this anvil allows the bottom of the Double Headed Rivets to remain rounded. $2.50 USD each Click here to order (they're on the Tools Page)

Metalworks Main | Charms & Buttons | Eyelets & Rivets |
| Brads | Tools | Copper | Tin |