|
|
Framed
Snowflake Ornament*
Artwork and photos ©2009
Suzanne Cannon
|
|
*links go to www.quietfiredesign.ca
each
link will open a new window. When you are finished looking at the
new page, just close it and you will return here!
|
|
Supply List:
|
 |
Instructions
- Cut a piece of fine brass wire to 12". "Fold"
wire in half.
- Apply E6000 glue to one brass snowflake. Lay folded end
of wire in the glue. Place second brass snowflake on top.
Check that wire is only sticking out one side of the snowflake.
Make sure that the two snowflakes are aligned. Allow to dry.
- Open the flip top frame and position the snowflake sandwich
inside the frame. Spread the wire ends and thread them through
the top of the frame, one on each side of the hanger. Close
the flip top frame. Pull the wires so the snowflake sandwich
is positioned. Twist the wires together to secure them. Do
a final positioning of the snowflake sandwich, then snip the
excess wire.
- Add a ribbon and a tag with sentiment.
- Hang it up!
|
go to the top